Default AFR Knock counts reading

[turbobuick]

How do I change the default screen from AFR and knock counts to AFR and Boost? I have the SMG with the ECU-GN
Thanks

 

[EricM]

Unfortunately there is no way to change that. All the screens are pre-configured.

 

[turbobuick]

I would like something that will display AFR and Boost that I can look at while going down the track. The are many gauges on the market that do just that but I do not want to have to wire up a second WBO2 and run another vacuum line in the car. It kind of defeats the purpose of getting the ECU-Gn in the first place with a nice factory PnP install. I was under the impression the could SMG did this when used with the ECU-GN from another post.

I can't believe this system does not offer a configurable gauge or display dash that does this. The only other option I have seen is the Racepak dash and comm cable which is an absurd amount of money by the time you purchase everything.

This is a pretty serious strike against the ECU-GN and MS3pro IMO and I wish I realized this beforehand.

 

[EricM]

There is the Perfect Tuning gauge, and also the AEM CD-5 and CD-7 dashes that are compatible, and may have the configurability you want.

 

[EricM]

I will see if we can make a special firmware for the SM-G to swap the knock with boost on the main display screen.

 

[turbobuick]

That would be super cool, thanks

That would be a nice addition for people using it with the ECU-GN