Scan Master Reading

[Tzque]

I just installed the chip , injectors , Maf and translator and here are my readings

757 02 millivolts
AF- 06-07
L8-47
Bat 14.2
Int-112
BL-118
NPH-00
CLT-154
AE-775
TPS-44
Iac -22

Please let me now what you think .

 

[EricM]

The BLM is on the low side, not terrible though.

What MAF are you using, and what MAF Base setting did you use in the Translator?

 

[Tzque]

I am using the LT1 , I have it set up for 3 on the last one off . I kept the knobs where they were . You sent me the directions a week ago . I promise you I am not a dumb as I read to be .

 

[Tzque]

The only other issue is that now is that the trans hold first gear for a long time . Is that normal .

 

[EricM]

For the BLM, you can help it by changing the MAF Base from 3 to 5, then reset the ECM.

Transmission shifting is not related to the computer or chip. That would be a mechanical adjustment. Are you talking about full throttle or part throttle?