Here is the complete download if you don't have the CD. It is all the same files that would have been on the install CD, and includes the files above.
This is the latest version 2.6.8. You will have to unzip it, and the powerlogger folder is inside.
https://www.turbotweaksupport.com/files/powerlogger.zip
Powerlogger manual:
https://www.turbotweaksupport.com/files/plmanual.pdf
Powerlogger install guide:
https://www.turbotweaksupport.com/files/plinstallguide.pdf
How to install the Scanmaster update chip:
https://www.turbotweaksupport.com/files/plsmupdate.pdf
If you already have Powerlogger working and you just want to update to 2.6.8, then download this file. Unzip (extract) it to your existing Powerlogger folder. You will just overwrite (replace) your old plc.exe with this new one, in your powerlogger folder. There is a file included in the zip called PL052.s19, which is the file you will use when reflashing the Powerlogger. Note if you have an SD2 chip, save your tune file before the reflash so you can reload it if necessary.
https://www.turbotweaksupport.com/files/plc2.6.8.zip
*** When updating the software to 2.6.8, you MUST also reflash the Powerlogger with the PL052 file, or it will crash if you try to go to monitor mode. ***
This is the latest version 2.6.8. You will have to unzip it, and the powerlogger folder is inside.
https://www.turbotweaksupport.com/files/powerlogger.zip
Powerlogger manual:
https://www.turbotweaksupport.com/files/plmanual.pdf
Powerlogger install guide:
https://www.turbotweaksupport.com/files/plinstallguide.pdf
How to install the Scanmaster update chip:
https://www.turbotweaksupport.com/files/plsmupdate.pdf
If you already have Powerlogger working and you just want to update to 2.6.8, then download this file. Unzip (extract) it to your existing Powerlogger folder. You will just overwrite (replace) your old plc.exe with this new one, in your powerlogger folder. There is a file included in the zip called PL052.s19, which is the file you will use when reflashing the Powerlogger. Note if you have an SD2 chip, save your tune file before the reflash so you can reload it if necessary.
https://www.turbotweaksupport.com/files/plc2.6.8.zip
*** When updating the software to 2.6.8, you MUST also reflash the Powerlogger with the PL052 file, or it will crash if you try to go to monitor mode. ***
Last edited: