Definition ADX file for TunerproRT to datalog with Scanmaster

[EricM]

Here is a link for the ADX definition file for Tunerpro 5 RT, in order to datalog with the Scanmaster 3.

Save the file below. It needs to be unzipped.

https://www.turbotweaksupport.com/files/sytyscanmaster2.zip (unzip and it will be an adx file)

We may change or tweak it over time, but this one covers pretty much everything you would want to log.

 

[elorejas]

I downloaded the tunerpro free trial and then this adx file but I cant get it to work I have the scanmaster booklet did the steps but its not the same any other steps I should do. want to record a run on the truck to see what other tuning advice I can get to take the kr out of my truck

 

[EricM]

Let me know which part you're getting hung up on. Are you using a serial port, or the USB adapter?

 

[elorejas]

I downloaded everything just cant get it to scan the booklet shows different windows than the actual tuner pro. I am using the usb adapter from the scanmaster. Thanks in advance. Have a quick question about my truck as well test drove it today if I drive it in and get almost no KR the most it went up was 2 but if I put it in overdrive it goes all crazy up to 11KR

 

[EricM]

Make sure you downloaded Tunerpro RT v5. Also, on the menu's, goto "View", then "Toolbars", and check the "Data Acquisition" and "Data Acquisition Log" options.

I would have to see a log, but make sure the boost isn't going too high for the fuel you are using. For 93 octane, you should be around 15psi give or take.

 

[elorejas]

I will try to see if I can log it and I will post it I have lowered the psi on the truck but it still keeps giving me 18 psi and I have about 2 Kr and afr around 10.5 at wot. It only knocks all over the place when in overdrive kind of weird

 

[EricM]

I moved your post to a new thread in the Velosyty chip section called "knock issues".